Plant & Manufacturing Center Cleaning Services
CLEANING PLANTS We are contractors for deep cleaning in factories, food processing and industries. We specialize in clean areas that need extra attention or which by their nature require equipment, materials and expertise, as are: Grease cleaning and pipe walls Cleaning and painting of metal, concrete surfaces, or any material Cleaning and painting of machinery and equipment Cleaning and painting at heights, surface or underground. Cleaning of industrial buildings Cleaning machinery and equipment Cleaning ceilings and roofs Cleaning great heights Cleaning confined spaces Cleaning all levels: underground, surface or elevated Cleaning factories in Guadalajara, Zapopan, Tonala, Tlaquepaque, Tlajomulco, Equipment and labor, as well as the protective measures necessary to perform these jobs are our responsibility and are on our own. (Scaffolding of special measures, use of fall arrest protection and personal protective ACOMPUTER) All our staff are registered with IMSS Cleaning factories Objective: To keep all areas clean to prevent cross contamination manufactures. Responsible for the task: Plant employees and contractor personnel cleaning. Responsible for verification and endorsement: Production Supervisor, Quality Supervisor, Maintenance Supervisor. Our factories cleaning services include: Maintain general work areas clean and ordenadas.Los production employees are directly responsible for keeping your work area clean and tidy All tools and portable equipment should be stored after use. Cleaning and collection of any spills or leakage of oil, fuel, raw materials, finished product however small or appears. Report to the maintenance department has to be repaired as soon as possible any leakage affecting the storage and production of raw material and product Each area of the plant must be swept at least once daily. The dusty areas will require more frequent cleaning (once per turn) All spills, including torn bags should be cleaned as soon as possible. The unidentified material for recycling must be sent to the dumpster. We clean designated areas according to the program of scheduled cleaning and we recorded in a written log of the work done. The person supervising the cleaning must place their initials on this blog. There are 3/2 cleaning, depending on the material and equipment required: manual, mechanical and blown out with air. When compressed air is used use safety glasses, dust and particulate respirator and hearing protection. As a contractor you must entregársenos a thorough cleaning to be done for the period that is required to be completed program. Our staff always use the personal protective equipment required for different tasks according to their degree of difficulty or special features work Excess accumulations of oil and grease shall be removed by scraping Teams do not need to be disassembled. The lockout and tagout procedures must be followed. Any scraping material should be disposed in the trash Established procedures should be followed Cleaning factories We perform cleaning of the areas that are marked in the cleaning program and write down the activities that were in them. The operators are responsible for maintaining the containers and packaging always closed, clean and identified to avoid cross contamination. Avoid cross-contamination with foreign material that could come attached to the packaging of inputs, packaging must be inspected before use and, if necessary, should be cleaned. The supervisor or the supervisor Production Quality Assurance is responsible for verifying that the area cleaning is done properly. We keep cleaning tools area at a specific location designated for that purpose.